Is it possible to cut a single piece?
Yes, it is also possible to cut out just 1 part.
What thickness can we cut?
The distance between the work table and the cutting head is max. 200 mm, this determines the maximum thickness of the cuttable material. This does not mean that we can cut all materials up to this thickness. Additionally, as the thickness of the material increases, the quality of the cutting surface can significantly deteriorate.
Is it possible to cut (bite) into the material at a specified depth?
Not at an even, adjustable depth. Markings can be created on metal surfaces in, with a technique similar to engraving, but they are for industrial use only.
Can skew be eliminated?
Yes, but this has strict basic quality criteria, which in any case requires consultation.
What material and material quality can we provide?

We stock a limited number of sheets, with varying quality and quantity. We have types of steel (S235, S355 and KO33, KO38) and aluminum sheets (AlMg3, AlMg4,5Mn0,7, AlMgSi1). Of course, according to the customers’ request, we can obtain a variety of materials, based on prior agreement.

What are the standard thickness sizes for sheet material?

1-1,5-2-2,5-3-4-5-6-8-10-12-15-(16)-(18)-20-(22)-25-30 -35-40…. mm We cannot change the thickness of the sheets sold by the manufacturers.

How big is the cutting table?
Die maximale Größe beträgt 2000*6000 mm.
What file format can we receive a drawing in?

Ideally, we need a vector file. If that is not possible, we can also receive documents in different formats, however we will charge a free for preparation, conversion and adaptation into a workable file.

The most important is that all sizes must be contained in the drawing for us to be able to work with it. If no pattern or drawing exists so far, then continuous consultation will be necessary during the design period.

Is it possible to cut a single piece?
Yes, it is also possible to cut out just 1 part.
What thickness can we cut?
The distance between the work table and the cutting head is max. 200 mm, this determines the maximum thickness of the cuttable material. This does not mean that we can cut all materials up to this thickness. Additionally, as the thickness of the material increases, the quality of the cutting surface can significantly deteriorate.
Is it possible to cut (bite) into the material at a specified depth?
Not at an even, adjustable depth. Markings can be created on metal surfaces in, with a technique similar to engraving, but they are for industrial use only.
Can skew be eliminated?
Yes, but this has strict basic quality criteria, which in any case requires consultation.
What material and material quality can we provide?

We stock a limited number of sheets, with varying quality and quantity. We have types of steel (S235, S355 and KO33, KO38) and aluminum sheets (AlMg3, AlMg4,5Mn0,7, AlMgSi1). Of course, according to the customers’ request, we can obtain a variety of materials, based on prior agreement.

What are the standard thickness sizes for sheet material?

1-1,5-2-2,5-3-4-5-6-8-10-12-15-(16)-(18)-20-(22)-25-30 -35-40…. mm We cannot change the thickness of the sheets sold by the manufacturers.

How big is the cutting table?
Die maximale Größe beträgt 2000*6000 mm.
What file format can we receive a drawing in?

Ideally, we need a vector file. If that is not possible, we can also receive documents in different formats, however we will charge a free for preparation, conversion and adaptation into a workable file.

The most important is that all sizes must be contained in the drawing for us to be able to work with it. If no pattern or drawing exists so far, then continuous consultation will be necessary during the design period.